The CLARIYATT® SET dyes are improved from high-tinctorial 1:2 metal complex and high-fast reactive dyestuffs with good properties of both. It has all kinds of excellent fastness, good build-up, good reproducibility, wide range of shades and good combinability. It is mainly used for the dyeing of polyamide, loose stock, top wool, spinning and cloth, etc.
• High light fastness
• High wet fastness
• Good reproducibility
• Very good dye-uptake
• Good compatibility
| Yellow 2R | Red G | Navy R |
| Yellow 4GN | Red 2B | Blue 2R |
A: 1-2g/L Sodium Acetate
0-10% Sodium Sulfate
1-2% Levelling Agent
pH 4.5-5.0(Adjust pH with 80% Acetic Acid)
B: X% CLARIYATT® SET dyes
• Start bath at 30°C dosing the auxiliaries
• Run 10’
• Add CLARIYATT® SET dyes and run 10’
• Raise to 98°C with a gradient of 1°C per minute
• Keep warm 45-90’ (from pale to deep shade)
• For shading additions cool down the liquor to below 70°C, add predissolved dye,
run 10’, heat at 98°C and maintain for 30’
• Cool down
The wet fastnesses can be significantly improved by aftertreating with:
• for general wet fastnesses: Fixing Agent 2-4%
• under chlorinated water conditions: Fixing Agent 4%
Remark: the dyeing depth for black is 1%、4%
All information is only for reference, customer must confirm by testing for it's intended conditions of use. It should not be construed as guarantee specific properties of the products described or their suitability for a particular application.
